ROLLING SCAFFOLD PARTS CODE

ROLLING SCAFFOLD PARTS CODE

This material is sourced from the Alberta King’s Printer consolidation of the Occupational Health and Safety Act, Occupational Health and Safety Regulation and Occupational Health and Safety Code and, while thought to be accurate, is provided without warranty of any kind. Suspended platform is braced to prevent swaying. Platforms are completely planked between the hangers, and On blocks that are secured to the side of the hangers below each beam as an To the vertical hangers at least 300 millimetres above the bottom of the

Suspended platform is supported by lumber beams that are 38 millimetres by 140 To a block that rests on the top edge of each thrustout as an additional Maximum distance between thrustouts is 2.3 metres,Ī working platform is suspended or thrust out, the platform isīy vertical lumber hangers that are 38 millimetres by 140 millimetres or largerĪnd not more than 3 metres long secured to the side of each thrustout andĮxtending at least 300 millimetres above the top of each thrustout, and Than 1.5 times the length of the outboard portion, Inboard portion from the fulcrum point to the point of anchorage is not less Inboard ends of thrustouts are securely anchored against horizontal or vertical Are constructed of lumber that is 89 millimetres by 140 millimetres and placedĭo not extend more than 2 metres beyond the edge of the bearing surface,Īre securely braced at the fulcrum point against movement or upset,

Rolling scaffold parts